One Stop Handling Ireland Ltd.
Unit 113, Millennium Trade Park, Ballycoolin,
Dublin 15

Phone : 01 864 9008
Mobile: 087 050 5213

Have Us Call You !

Name

Email

Mobile



Stair Climber

Stair Robot SR450


The StairRobot SR450 is a powerful yet easy to handle item of moving equipment.


The SR450 is a battery-powered stair-climbing device styled for the full-time professional or distribution operator. Twin rubber tracks spread the load comfortably over three treads of a stairway as the SR 450 moves up or down stairs.


The SR 450 is equipped with a folding swivel wheel for short turning in narrow spaces and easy handling to and from a staircase. Items up to 1880 mm can be handled by use of the extendable frame structure. For longer items we developed a special version with remote control.



Drive

Driving power is provided by a minimal noise 24 V permanent magnet motor and is transmitted directly to the drive-axle by a built-on worm-gearbox. The PM-motor creates an effective break when the control switch is released or the power supply is interrupted for any reason.

Batteries:

4 batteries are fitted in series to provide a 24 volt output. A integrated led battery indicator on the control display makes it possible to monitor the batteries.

Charging:

The SR 450 comes with a 220V 0r 110V / 24 charger (3 amp), charging time with batteries fully discharged 3,5 hours. When the batteries are fully charged the charger will automatically turn into a trickle mode. For charging the SR 450 on a van or truck an optional 4 amp 24V booster/charger is available which makes it possible to charge the SR 450 between jobs.

Dolly:

heavy duty dolly is available for handling long and bulky objects. The dolly is used to transport the (loaded) SR 450 to and on the stairs and is used at the landing.


Technical data:


Stair-Robot SR 1750 HE



The stairrobot SR 1750 HE is designed to carry unit loads weighing up to 1000 kg up- and down stairs. The accessory equipment, stair approach ramp, manoeuvring dolly and the turntable have been designed to assist the movement up to and onto the stairs and the take off from the top and journey to the final destination. The stairrobot SR 1750 HE is equipped with a hydraulic levelling platform which makes it possible to transport fragile loads in horizontal position throughout operation. The stairrobot SR 1750 HE not only reduces the number of men required for a professional move but also greatly reduces the hazards involved in a traditional stair move.



Drive:

Driving power is provided by a minimal noise, single-phase AC motor with thermal cut-out and is transmitted to the drive-axle by a built-on worm-gearbox. The worm-wheel reduction forms an effective brake if the current is interrupted for any reason.

Hydraulic levelling platform:

The hydraulic levelling platform is operated by a single-phase, low noise AC motor with thermal cut-out. A hydraulic pump is built directly onto the motor. The lowering speed of the platform can be adjusted by the descent-adjuster.

Loading winch:

With the additional winch and ramp a load can be hand-pulled onto the stairrobot with a minimum of effort.

Control:

The robot is controlled by a low voltage (24V) manually operated 4-button switchbox connected to the stairrobot with a 2 meter remote-control cable.


Technical data:


Warrior Powered Stair Climber




T140 T150
Capacity 110Kg 150Kg
Speed 1 Step per sec 1 Step per sec
Weight 34Kg 42Kg
Steps per charge 2x12v 7.2Ah 2x12v 9Ah
Foot plate 300x305 foldable 300x305 foldable
Wheel diameter 260mm 300mm
MBS5 5 755mm

                              

If you have a specific question about our products and services or you would like a very competitive quote, contact Paul Parkes, our Senior Materials Handling Engineer. Telephone: 01 864 9008